GA.MA Italy

IQ2 Perfetto

• Required Maintenance: Manual clean of mesh filters. Manual cleaning is obligated after each working day. Cleaning filter steps: 1. Spray entire filter with Windex and let it sit for 1-minute. 2. Rinse filter with water 3. Confirm that you can see through the filter. 4. Let it air dry and use again. 5. Activate Auto cleaning Function 6. With the filter now clean, dryer should function properly. 7. Confirm if the filter is clean by looking through it • Ideal Maintenance: Auto-cleaning: The Auto-Cleaning function should be performed after each use of the hair dryer or every 12 hours. How to Activate Auto-Cleaning: 1. Turn ON 2. Turn OFF 3. With hairdryer OFF, hold the Auto Cleaning button for 6 seconds. • What happens if I do not activate the Auto-cleaning function? - The iQ1 has a LED light that turns ON when self-cleaning is needed. When the LED lights up, the hairdryer could have a delay or may not start; in this case unplug iQ1 from power, plug it back in, and run the auto-cleaning process. • What does it mean if my IQ2 shuts down and the middle light turns on? - For protection purposes, the hairdryer may shut down if there is an excessive buildup of dirt in the filter. Filter cleaning is essential to prolong the hair dryer's lifespan, ensure the best performance, and prevent it from reaching excessive temperatures. • How do I know if my filter is clogged? - If the filter is clean, you have to be able to see through the filter. - If you find that you can't see through it, you should clean it immediately or replace with a new one. • How should I clean the filter of my IQ? - You can clean the filter or replace it with a new one. Cleaning filter steps: 1. Spray entire filter with Windex and let it sit for 1-minute 2. Rinse filter with water 3. Let it air dry and use again. 4. Activate Auto cleaning Function 5. With the filter now clean, dryer should function properly.